earthSCAN 

BLISSTOOL LTC64X is available in seven versions: v1, v2, v2i, v3, v4, v5, v6.

Its operating frequency, by potentiometer FREQUENCY, can be adjusted (+-60Hz), to avoid external interference's such as: interference from other close working metal detector with the same or similar operating frequency; and powerful industrial interference's. Adjustable by potentiometer TONE, is the frequency of the output sound of the metal detector.

Given its professional character, BLISSTOOL LTC64X has many options for adjust to the realization of its universality and getting the most of its opportunities. If the user is a beginner and do not understand for what serve the appropriate potentiometer or switch, it is sufficient to maintain it in the recommended, in the user guide, level, whereby relatively easy to make the metal detector in the regime close to optimal, but later, when the user gain experience in working with the metal detector, to optimize its behavior to a specific terrains by fine adjustment of the respective potentiometers and switches.

Its behavior can be fully configured according to the wishes of the user and the characteristics of the terrain. BLISSTOOL LTC64X can be "noisy" or completely "silent." Particular behavior is set by appropriate adjustment of the metal detector, notably through appropriate adjustment of the potentiometers which largely determine its sensitivity: potentiometer GAIN which serving for setup of the input AC amplification of the signal from the detected object; potentiometer THRESHOLD which serving for setup of the sound threshold; potentiometer SILENCER which serving for setup of degree of suppression of the background sound and for stabilization of the audio threshold.

BLISSTOOL LTC64X has high detection speed and high recovery speed. This ensures its stability regardless of the speed of search and allows the efficient detection of deeper objects located near to the iron.

It features manual and automatic ground balance mode, as in automatic mode is available additional switch with three auto ground zones for soils with low, medium and high mineralization. These preset zones make use of the metal detector easily and effectively.

Its discrimination is adjusts by: DISCRIMINATOR switch that provides three independent modes of discrimination and allow optimization of its behavior, and potentiometers DISCR LEVEL and DISCR DEPTH, which enable: set of detection/rejection level of iron, tin-foil and low-grade non-ferrous metals (usually pollutants) and set the depth of discrimination. All this allows to achieve optimum setting of the metal detector at contaminated terrains, terrains with hot rocks and mineralized terrains, and are a prerequisite for even better results.

Its audio discrimination, thanks to the perfect human abilities through their hearing to perceive and analyze in detail the sound signals, is the ideal solution for instant detection, analysis and recognition even and of the weakest signals by deeply buried objects.

LTC64X v1 is the standard version.

LTC64X v2 is a version specially adapted for heavy field conditions.

LTC64X v2i is an improved version of v2.

LTC64X v3 is a top version with extreme performance.

LTC64X v4 is a top version with extreme depth of detection, automatic stabilizer with a high degree of stabilization, NORMAL and TURBO/BOOST mode of the transmitter.

LTC64X v5 is a top version with extreme depth of detection, three automatic stabilizers (with low, medium and high degree of stabilization), NORMAL and TURBO/BOOST mode of the transmitter, extreme extended discrimination range and improved distribution of the three areas for discrimination (providing possibility for effective study and understanding of the detected metal object even before it to be excavated).

LTC64X v6 is a top version with extreme depth of detection, automatic stabilizer with a very high degree of stabilization, NORMAL and TURBO/BOOST mode of the transmitter, extreme extended discrimination range and improved distribution of the three areas for discrimination, ORE and SOIL modes (providing better work at heavy terrain conditions, such as: highly mineralized terrains, terrains with a high content of ore, highly contaminated with iron terrains, highly mineralized sands, but also better depth of detection at low and medium mineralized terrains).

LTC64X v2 is better than v1 with that this LTC64X v2 is optimized to work on:
   - highly contaminated terrains;
   - highly mineralized terrains;
   - terrains with a high content of ore.

Of the above described terrains, LTC64X v1 also works, but LTC64X v2 is additional optimized for such terrains.

LTC64X v2i is better than v2, with that this LTC64X v2i has improved:
   - the depth of detection;
   - the sensitivity to very small metal objects.

LTC64X v3 is better than v2i, with that this LTC64X v3 is:
   - with extreme improved depth of detection;
   - with extreme improved sensitivity to very small metal objects;
   - optimized for Gold Nugget prospecting;
   - with extended setup of the sensitivity and the behavior;
   - with capable of successfully competing with multi-period pulse induction metal detectors. In comparison with them, has a similar depth of detection, greater universality and excellent discrimination.

LTC64X v4 is better than v3, with that this LTC64X v4 is:
   - with extreme improved depth of detection to very small, small, medium and large metal objects;
   - with extremely improved stability, that is maintained even when using maximum settings;
   - with two base operating frequencies: 8.0KHz and 7.4KHz;
   - with smooth regulation of the operating frequency from 7.4KHz to 8.0KHz;
   - with smooth regulation of the transmitted power of the transmitter;
   - with NORMAL (at frequency 8.0KHz) and TURBO/BOOST mode of the transmitter (at frequency 7.4KHz) with increased transmitted power;
   - TURBO/BOOST mode of the transmitter, effective not only at low mineralized terrains, but also in medium and highly mineralized terrains, terrains with a high content of ore and terrains dotted with stones and rocks;
   - with an automatic stabilizer with a high degree of stabilization;
   - with improved discrimination;
   - with improved elimination of the inhomogeneities of the field;

   - with improved rejection of iron, slag and hot rocks;
   - with improved elimination of electromagnetic interference's;
   - with behavior providing a more comfortable work in any type of terrain, including highly mineralized terrains, terrains with a high content of ore and terrains dotted with stones and rocks.

LTC64X v5 is better than v4, with that this LTC64X v5 is:
   - with extreme extended discrimination range. Besides iron, aluminum foil and low conductive metal objects from non-ferrous metals and alloys, if necessary, can discriminate and medium and high conductive metal objects from non-ferrous metals (zinc, nickel, copper, lead, aluminum, silver, gold) and their alloys;

   - with improved distribution of the three areas for discrimination, providing possibility for effective study and understanding of the detected metal object even before it to be excavated. Thanks to this, with high probability, can assume what exactly is the detected metal object even before it to be excavated: small, large, low quality, high quality, low, medium or high conductive. Moreover, for specific terrains and conditions, which the user is acquainted, can be assumed and from what kind of metal is the detected metal object: zinc, nickel, copper, lead, aluminum, silver, gold; and what exactly is the detected metal object: coin, artifact, treasure or modern pollutant. All this, provides a more effective and more convenient selective search of metal objects;
   - with three automatic stabilizers (with low, medium and high degree of stabilization), providing the opportunity for highly effective stabilization and extreme performance in all field conditions.

LTC64X v6 is better than v5, with that this LTC64X v6 is:

   - with improved work at highly mineralized terrains, terrains with a high content of ore, beach search (on the coast, moist soil, dry sand, wet sand, mineralized sands);
   - with mode ORE, optimized for wotk at highly mineralized terrains, terrains with a high content of ore, terrains dotted with hot rocks and stones, highly contaminated with iron terrains, beach search in highly mineralized sands;
   - with mode SOIL, optimized for wotk at low and medium mineralized terrains, terrains dotted with stones and rocks, beach search in low and medium mineralized sands;
   - with higher detection speed and higher recovery speed in mode ORE;
   - with improved depth of detection and improved comfort when working on any type of terrain;
   - with automatic stabilizer with a very high degree of stabilization.

For all BLISSTOOL LTC64X versions are available:
- STANDARD package with 28 cm (11") DD search coil BLISSTOOL DD28SC2;
- DEEP package with 38 cm (15") DD search coil BLISSTOOL DD38SC2;
- EXTREME package with 28 cm (11") DD search coil BLISSTOOL DD28SC2 and 38 cm (15") DD search coil BLISSTOOL DD38SC2.

Which version is right for you to judge yourself according to your specific needs.

Our additional guide recommendations and clarification for you are:

1/ In terms of the terrain and the universality:
   - All versions are designed to be universal, i.e. with adequate user setup, all versions work well on any type of terrains.

2/ In terms of the depth of detection:
   - In practice, when properly adjusted, v1 and v2 have the same depth of detection;
   - v2i has better depth of detection of v1 and v2;
   - v3 has better depth of detection of v1, v2 and v2i;
   - In practice, when properly adjusted, v4 and v5 have the same depth of detection. v4 and v5 have better depth of detection of v1, v2, v2i and v3;
   - v6 has better depth of detection of v1, v2, v2i, v3, v4 and v5.

The SILENCER potentiometer serves for setting of the degree of suppression of the background sound and for stabilization of the audio threshold. The background sound is a set from defined by THRESHOLD potentiometer audio threshold of the metal detector and imported external noises (the base signal on the ground and other external interference's). In most cases, the volume of the background sound is equal to the volume of the audio threshold, but its inequality due to imported external noises.

The GAIN potentiometer serves to define the input AC amplification of the signal from the detected object. The proper adjustment of the GAIN potentiometer provides increased depth of detection.

The TONE potentiometer serves to define the frequency of the output sound of the metal detector. By TONE potentiometer, the user can adjust the most audible and pleasant sound to him. In the presence of certain external interference, the change of the frequency of the output sound via TONE potentiometer, leads to stabilization of the sound of the metal detector.

The DISCRIMINATOR switch serves to define one of the three independent modes of discrimination. The various modes are conditional numbered as: „I“, „II“ and „III“. In the same position of DISCR LEVEL and DISCR DEPTH potentiometers, the discrimination is strongest in the mode „I“, with average value is in mode „II“, and the lowest is in the mode „III“.

The DISCR LEVEL potentiometer serves for adjusting the detection/rejection level of iron, tin-foil and low-grade non-ferrous metals (usually pollutants), and for baseline exclusion of the discrimination (All metals mode) when it is set to level „0“.

The DISCR DEPTH potentiometer serves for adjusting the depth of discrimination (the maximum depth to which the metal detector distinguish the metals).

The Loudspeaker serves for producing a sound when the metal detector detect an object. The sound is deep-toned and non-pausing for non-ferrous metals and recurring (repeating) for ferrous metals (iron).

The PHONES connector serves for plug to metal detector, if necessary, stereo headphones with 6.35mm (1/4") stereo jack. When the headphones are plugged in, the loudspeaker is switched off automatically and the metal detector’s sound is heard only in the headphones.

The COIL connector serves for connection of the search coil of the metal detector to its electronic block.

The BAT LOW LED shows the available charge in the LiPo battery. When this LED lights up, it is a signal for low battery.

Standard Package

- Metal detector BLISSTOOL LTC64X with 28cm (11") DD search coil BLISSTOOL DD28SC2 and LiPo battery 11.1V, 2200mAh
- Automatic LiPo battery charger
- User guide
- Warranty card
- Invoice
- Transport and storage box
- 3 Year Worldwide Warranty

Optional Accessories