earthSCAN 

Metal Detecting

Minelab GPX 4500

Minelab GPX 4500 Metal Detector

 

A creation worth its weight in gold! The versatile GPX-4500 uses gold finding technology that offers loads of features with great performance. Incorporating Smart Electronic Timing Alignment (SETA) technology alongside Minelab’s Multi Period Sensing (MPS) and Dual Voltage Technology (DVT), it is quieter and more immune to interference than earlier GPX models, making it a real pleasure to use.

No matter if you've never picked up a detector before, the GPX-4500 offers a number of pre-programmed search modes allowing you to start detecting like an expert right away! GPX-4500 has good discrimination, including the Iron Reject function. This combined with the specially programmed Hi Trash search mode makes searching high-junk areas possible. GPX-4500 is also suitable for relic and jewelry hunting, and will detect many of the small or deep targets invisible to some treasure detectors.

Features

  • SETA, DVT & MPS Technology make small hard to hear nuggets more obvious.
  • Timings in the GPX-4500 is even more versatile. In addition to the four timings found on the previous model, the GPX-4500 has two additional timings: Enhance and Sharp. The Enhance timing is a powerful feature, similar to the Sensitive Smooth timing, but provides an improvement in the depth and signal response on small and large targets alike. The Sharp timing is more suited to quieter soils and can also help to pinpoint faint targets.
  • Six pre-programmed search modes for easy switch-on-and-go detecting. In addition to General and Deep search are Hi Mineral; Hi Trash; Patch and Test A modes. All six search modes can be modified with your favorite settings and renamed. Ground Balance Off for neutral soils in addition to normal and specific ground balance options on previous model. In GB Off the ground balance circuit is bypassed for deep detection. This is a useful feature in very benign low mineralized or salt saturated soils. This setting will also work well for treasure or relic hunters in loam or sandy soils.
  • Backlight with adjustable time-out to preserve battery life.
  • Stabilizer for the smoothest threshold. The Stabilizer function is a fine tuner that gives the operator full control over the threshold stability. In quiet conditions, increase the stabilizer control and faint target signals will be more obvious. Turning it down will provide you with a smoother threshold, improving your ability to pick up the faintest of signals.
  • Target Volume in addition to the Volume Limit control prevents signals from being too loud. Target Volume allows you to increase the strength of softer target signals. This is useful in windy conditions, for people suffering from hearing loss, and to adjust the audio volume when using external speakers. The Target Volume can also be used as an audio boost in mild soils, and can be used to reduce or smooth out ground noise signals in highly mineralized soils. This is a powerful feature, and will work in conjunction with the Stabilizer control fine-tuning.
  • Improved discrimination so you can detect trashy ground. The Iron Reject function allows the operator to set the desired level of discrimination, from cautious to aggressive. This allows detecting in areas with high levels of ferrous junk.
  • Built-in amplifier so you can hear soft target signals from deeper nuggets, more easily. The Li-lon battery pack includes a built-in audio amplifier, allowing you to use an external speaker without the need for any external booster. The design of the amplifier and the use of high-quality low noise components ensures the signal response is clear and crisp, without the added background hum of some boosters.


Specifications

Product Minelab - GPX-4500
Application - Gold Prospecting & Deep Relic
Technology - MPS, DVT & SETA
Frequency/Transmission - Bi-Level, Advanced Pulse Induction
Coil - (standard) 11" Round Double-D plus 15" x 12" Monoloop
Audio Output - 6.35mm (1/4") headphone/speaker jack.
Headphones Supplied - Koss 100 ohm headphones.
Visual Display - LCD screen 64x128 pixels, transflective.
Backlight - Yes with adjustable automatic 'time-out'.
USB Connectivity -
Memory Setting - changes saved automatically and remain until changed or reset. Factory Presets can be restored on start-up.
Depth Indication -
Detect Modes - General, Deep & Custom. Custom Modes are: Hi Mineral, Hi Trash, Patch & Test A.
Discrimination - Iron Reject: range 1 to 10 & All Metal.
Timings - Enhance, Normal, Sensitive Smooth, Salt Course, Sensitive Extra & Sharp.
Audio Tone - Variable Control 1 to 100.
Audio Type - Quiet, Normal, Deep & Boost.
Ground Balance - Automatic Ground Balance, Fixed & Tracking: Slow, Medium & Fast.
Ground Balance Type - General, Specific & Ground Balance Off.
Trash Density -
Pinpoint - Quick-Trak button.
Sensitivity Adjust - Rx Gain 1 to 15.
Tune / Noise Cancel - Automatic & Manual 0 to 255.
Threshold - Adjustable turn control.
Target Volume - Adjust Volume Limit 1 to 20.
Battery - Lithium-Ion with built-in amplifier (up to 12 hrs).
Supplied with mains and vehicle charger.
Low battery alert - Audio alert.
Length - 1100mm - 1300mm (43.3" - 51.2").
Weight - 2.4kg (5.3lbs) (ex. battery).
Warranty - 3 years control box & coil.

GPX-4500 Control Panel


Minelab GPX-4500 Metal Detector

 
 

See your local Minelab Dealer.......